Finally got to take some pictures of the CLARK CUSTOM RUGER 10/22 BARRELED ACTION. The pictures are mostly of the receiver to show some of the details. The BELL & CARLSON ODYSSEY 10/22 STOCK should arrive Monday so progress will continue shortly.
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
I would have preferred an Anschutz style stock but being left handed my choices were very limited. I ended up getting a BELL & CARLSON ODYSSEY from Stocky Stocks for substantially cheaper about $100 than anywhere else. Bell & Carlson is typically a moderate quality product at half the price of it’s nearest competitor McMillan.
Bell&Carlson Ruger 10/22 Odyssey Stock
The Odyssey features a fully adjustable cheek piece and length of pull. The front to rear downward tapered forend allows for minute elevation adjustment by simply sliding the rifle. The vented forend has a rail for attachments. Fine and distinct checkering. For right-hand or left-hand shooters. Can be purchased with either 2-way or 3-way adjustable butt assembly, this is for the 2 way.
(Adjustable comb, adjustable L.O.P., no up/down butt adjustment)
POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE
The POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE Drop in kit that produces a 2 3/4 LBS. Trigger pull. These are the highest quality parts on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims. Choose from Adjustable or Non Adjustable Versions. You can Adjust the pre-travel out of the Adjustable ones without any problem. You have to remove the sear out of the gun to adjust it but once it is adjusted you can lock tight the screw with red lock tight and it will hold without any problems.
CLARK CUSTOM GUNS RUGER 10/22 BARRELED ACTIONS
If by some chance you have arrived at this website from a link at Rimfire World or Combatrifle.com, you will know that it’s common knowledge that I love the RUGER 10/22 and have been contemplating a DO IT YOURSELF 10/22 project for some time, but I have had a difficult time deciding what I wanted to do. My goal was to do something a little different but not insanely expensive. It would be effortless to order a complete 10/22 from the likes of VOLQUARTSEN for about $1200 and call it a day. The other day I was browsing the Brownells website, and I stumbled across a name in guns that I had forgotten about in recent years. That name is Jim Clark of Clark Custom Guns. Jim has a reputation for outstanding work on everything from 1911’s, Smith & Wesson Model 41’s, Smith & Wesson revolvers, AR-15’s, and you guessed it, the RUGER 10/22.
Brownells is offering several variations of CLARK CUSTOM GUNS RUGER 10/22 BARRELED ACTIONS. The differences between the models are as follows:
All models feature:
At this point, I’m leaning towards the TARGET STAINLESS with the FLUTED BARREL. The FLUTING adds $65 to the price, but I think the weight reduction will be worth it.
The CLARK CUSTOM GUNS RUGER 10/22 BARRELED ACTION will need to be bedded in a stock, and I will need to research those aspects of the project while saving money for the project. In the future, the site will have a static page devoted to this project for visitors to follow along.
|
|
Tactical Solutions X-Ring .22LR
Last week I got to handle a Tactical Solutions X-Ring .22. The Tactical Solutions X-Ring is essentially a CUSTOM RUGER 10/22
The rifles consist of a Tactical Solutions Predator Stock, Tactical Solutions X-Ring Receiver and Tactical Solutions X-Ring Barrel. The rifle was manufactured and assembled with perfection and the entire setup is light as a feather.
ACCUTEC RUGER 10/22 BARREL PUSHER
The AccuTec 10/22® Barrel Pusher is designed to easily remove factory and aftermarket barrels from the receivers of Ruger® 10/22® rifles.
The 10/22® Barrel Pusher works with all available calibers including 17HMR, 17HM2, 22LR and 22WMR. The tool removes the tightest barrel with no exertion and with no danger of marring or scratching the receiver. Any mounted scope or other optic may remain in place. The Barrel Pusher allows easy barrel removal anywhere in your home or apartment without the need of a bench-mounted vice.
Installation on a field stripped receiver literally takes seconds.
It appears to only be available at Brownells at this time.
A forum member of Tactical22.net posted this link.
Heres a description from the author:
It is easy to make the bolt stop on the 10/22 hold the bolt back, but it is a pain to make it let the bolt go forward again. This simple fix will make it much easier to release the bolt, just tug back and let it go!
Archangel Marauder Ruger 10/22 G36 Folding Stock
Now this looks like a clever upgrade for a Tactical Ruger 10/22
